Table of Contents
Advertisement
login: default
Change the panel mode switch to Service and press return...
(Operation : Locked state -> Service -> Return)
Leave it in that position for at least 5 seconds. Change the panel
mode switch to Locked, and press return...
(Operation : Wait more than 5 seconds -> Service state ->
Locked -> Return)
XSCF>
When the server is running normally, the mode switch is set to the Locked position.
2. Set the password policy.
• Display and set a password policy.
(This table includes the example of setting items and command used. It is similar
thereafter.)
3. Create an XSCF user account, password and privileges.
Create at least one user account with the user privileges of platadm and useradm:
■
XSCF> adduser yyyy
XSCF> password yyyy
XSCF> setprivileges xxxxxx
(See
(The screen is an operating procedure image.)
The default user account is publicly available information. When installation is
■
completed, create an appropriate user account for the user environment and log
in again with the new user account. For details on the user privileges, see the
Administration Guide.
When you add the user account, use the showuser(8) command with -l option
■
to confirm that there is no illegal user account in the user account list.
Note – In preparation for maintenance work, please create an account for a field
engineer (FE) with the privilege of fieldeng during the initial set up.
2-4
SPARC Enterprise Mx000 Servers XSCF User's Guide • January 2012
Section 2.2.2, "User Account Administration" on page
showpasswordpolicy(8),
setpasswordpolicy(8)
(See
Section 2.2.2, "User Account
Administration" on page
2-36)
2-36)
Advertisement
Table of Contents
