Table of Contents
Advertisement
Log Collection (Continued)
TABLE 9-26
Function
LDAP/SSL log display
Snapshot (or Data Collector)
COD log display
Component Information
To refer to the information and status of physical components in the server, select the
target component in the Physical tree. When you select a component, the component
information and the state are displayed in the main page. This information is
equivalent to the showhardconf(8) command.
To refer to the information and status of logical components that belong to each
domain, select the target component in the Logical tree. When you select a
component, the logical component information and the state are displayed in the
main page. This information is equivalent to the showboards(8) and
showhardconf(8) commands.
In addition, the state of each component on the Physical tree and the Logical tree can
be updated by pushing the REFRESH button of the XSCF Web Console. If there is a
component with an abnormal status, a mark is added to the component on the tree.
Select the component so marked, and confirm its details.
Note – Screen layouts and configurations may be changed to improve functionality.
Remarks
Display the LDAP/SSL log. This function is
equivalent to the log option of the
showldapssl(8) command.
Collects the log. This function is equivalent to the
snapshot(8) command.
Display the COD log. This function is equivalent to
the showcodactivationhistory(8) command.
Chapter 9
How to Use the XSCF Web
9-31
Advertisement
Table of Contents
