Table of Contents
Advertisement
3. Confirm the SNMPv3 trap settings.
XSCF> showsnmp
Agent Status:
Agent Port:
System Location:
System Contact:
System Description: DataBaseServer
Trap Hosts:
Hostname
--------
host3
host1
host2
SNMP V1/V2c:
Status: Enabled
Community String: public
Enabled MIB Modules:
SP MIB
FM MIB
Disabling Traps to the Target Host of SNMPv3
■
1. Use the showsnmp(8) command to display SNMP settings.
XSCF> showsnmp
2. Use the setsnmp(8) command to disable the trap destination host of the
SNMPv3 target.
XSCF> setsnmp remv3traphost -u yyyyy host3
3. Use the showsnmp(8) command to confirm that the trap destination host has
been disabled.
XSCF> showsnmp
2-138
SPARC Enterprise Mx000 Servers XSCF User's Guide • January 2012
Enabled
161
MainTower21F
musha@jp.fujitsu.com
Port
Type
----
----
162
v3
62
v1
1162
v2
Command operation
Community String
----------------
n/a
public
public
Username
Auth Protocol
--------
-------------
yyyyy
n/a
n/a
SHA
n/a
n/a
Advertisement
Table of Contents
