Table of Contents
Advertisement
4. Use the setldapssl(8) command to clear the usermap.
<Example1> Clears the attribute information.
XSCF> setldapssl usermap attributeInfo
<Example2> Clears the bind distinguished name.
XSCF> setldapssl usermap binddn
<Example3> Clears the bind password.
XSCF> setldapssl usermap bindpw
<Example4> Clears the search base.
XSCF> setldapssl usermap searchbase
5. Use the showldapssl(8) command to confirm that the usermap is cleared.
XSCF> showldapssl usermap
attributeInfo: (none)
binddn: (none)
bindpw: (none)
searchbase: (none)
The usermapmode must be enabled for using usermap.
Enabling or Disabling the Strictcert Mode
Command operation
■
1. Use the showldapssl(8) command to display the strictcert mode status.
XSCF> showldapssl
usermapmode: enabled
state: enabled
strictcertmode: disabled
timeout: 4
logdetail: none
2. Use the setldapssl(8) command to enable or disable the strictcertmode.
<Example1> Enable the strictcertmode.
XSCF> setldapssl strictcertmode enable
<Example2> Disable the strictcertmode.
XSCF> setldapssl strictcertmode disable
Chapter 2
Setting Up XSCF
2-79
Advertisement
Table of Contents
