Table of Contents
Advertisement
6.3
Contents of Parts Fault Notification
This section explains the contents of the email messages sent for parts faults that
occur.
FIGURE 6-3
FIGURE 6-3
Date: Mon, 02 Jun 2003 14:03:16 +0900
From: XSCF <root@host-name.example.com>
To: mail-address@smtp.example.com
Subject: Defect: xxxxxxxxxxx
MSG-ID: FMD-8000-4M, TYPE: Defect, VER: 1.0,
SERVERITY: Minor
EVENT-TIME: 04-07-2006 10:34:07 PST
PLATFORM: i386, CSN: -
DOMAIN-ID: -, SERVER-ID: opleval1
EVENT-ID: b57a9e55-f024-4ce7-9c39-ec7edd2548e4
DESC: The Solaris Fault Manager received an event from a component to which no
automated diagnosis software is currently subscribed. Refer to
http://<Message Site>/FMD-8000-4M for more information.
AUTO-RESPONSE: Error reports from the component will be logged for examination.
IMPACT: Automated diagnosis and response for these events will not occur.
REQ-ACTION: Run pkgchk -n fmd to ensure that fault management software is
installed properly. Contact FE for support.
DIAGCODE: 20010000-0108000112345678
Msg: CPU internal fatal error(/CMU#n/CPUM#n/CHIP#n degraded)
1. Reply address set with Mail Administration
2. Recipient address set with Mail Administration
3. Mail title
Note – The contents may be changed as a result of a function improvement without
notice. For details on the settings, see
The following items are displayed in the mail example of
figure are excluded):
shows the contents of mail sent for a parts fault that occurred.
Mail Sent for an XSCF Parts Fault That Occurred
1
2
3
Chapter
2.
FIGURE 6-3
Chapter 6
(No.1 to 3 in the
XSCF Mail Function
6-5
Advertisement
Table of Contents
