Fujitsu SPARC EnterpriseM3000 User Manual page 105

Setting a user domain
■
1. Use the showad(8) command to display user domains.
XSCF> showad userdomain
domain 1: (none)
domain 2: (none)
domain 3: (none)
domain 4: (none)
domain 5: (none)
2. Use the setad(8) command to set the user domain.
<Example1> Set the user domain 1.
XSCF> setad userdomain -i 1 '@davidc.example.aCompany.com'
<Example2> Set the user domain 2.
XSCF> setad userdomain -i 2 'CN=<USERNAME>,CN=Users,DC=davidc,DC=
example,DC=aCompany,DC=com'
3. Use the showad(8) command to confirm the user domain.
XSCF> showad userdomain
domain 1: <USERNAME>@davidc.example.aCompany.com
domain 2: CN=<USERNAME>,CN=Users,DC=davidc,DC=example,DC=
aCompany,DC=com
domain 3: (none)
domain 4: (none)
domain 5: (none)
If a user domain is specified at the login prompt, for example,
"login:ima.admin@dc01.example.com", that user domain is used for this login
attempt.
Setting default roles
■
1. Use the showad(8) command to display default roles.
XSCF> showad defaultrole
Default role: (none)
2-62 SPARC Enterprise Mx000 Servers XSCF User's Guide • January 2012
Command operation
Command operation