Table of Contents
Advertisement
Note – Only the domains that are able to be powered off are displayed.
Note – If the poweroff(8) command is performed, and the shutdown has
completed, then the domain is powered off.
4. Use the showlogs power command to check the system power off.
XSCF> showlogs power
Feb 26 14:22:19 JST 2010
4.4.3
Domain Power On
■
1. Use the showdomainstatus(8) command to check the power status of all
domains.
XSCF> showdomainstatus -a
DID
00
01
02
03
2. Use the poweron(8) command to turn on power to the specified domain.
<Example 1>
XSCF> poweron -d 0
DomainIDs to power on:00
Continue? [y|n] :y
00 :Powering on
*Note*
This command only issues the instruction to power-on.
The result of the instruction can be checked by the
"showlogs power".
<Example 2>
XSCF> poweron -d 0
DomainIDs to power on:00
Continue? [y|n] :n
XSCF>
Command operation
Domain Status
Powered Off
Running
Powered Off
Powered Off
Turn on power to the specified domain.
Cancel domain power on in progress.
System Power Off Operator
Chapter 4
--
Service
Operation of the Server
4-15
Advertisement
Table of Contents
