Table of Contents
Advertisement
The administrator group has platadm, useradm, and auditadm privileges and you
cannot change that. Also the operator group has platop and auditop privileges and
you cannot change that.
Setting timeout
Command operation
■
1. Use the showldapssl(8) command to display timeout period.
XSCF> showldapssl
usermapmode: enabled
state: enabled
strictcertmode: enabled
timeout: 4
logdetail: none
2. Use the setldapssl(8) command to set the transaction timeout.
<Example> The timeout priod is set to 10 sec.
XSCF> setldapssl timeout 10
3. Use the showldapssl(8) command to confirm the timeout.
XSCF> showldapssl defaultrole
usermapmode: enabled
state: enabled
strictcertmode: enabled
timeout: 10
logdetail: none
Enabling or Disabling the Logging of LDAP/SSL Authentication and
Authorization Diagnostic Messages
Command operation
■
1. Use the showldapssl(8) command to display the log detail level.
XSCF> showldapssl
usermapmode: enabled
state: enabled
strictcertmode: enabled
timeout: 10
logdetail: none
Chapter 2
Setting Up XSCF
2-89
Advertisement
Table of Contents
