Enabling or Disabling the XSCF Network and Specifying an IP Address
and Netmask for the Network and DSCP
Command operation
■
1. Use the shownetwork(8) command to display network interface information.
<Example 1> Display information on all network interfaces of XSCF.
XSCF> shownetwork -a
<Example 2> Display information on network interfaces of LAN#1 in the
XSCF Unit #0 (XSCFU#0).
XSCF> shownetwork xscf#0-lan#1
xscf#0-lan#1
Link encap:Ethernet
inet addr:192.168.10.11
UP BROADCAST RUNNING MULTICAST
RX packets:54424 errors:0 dropped:0 overruns:0 frame:0
TX packets:14369 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:20241827 (19.3 MiB)
Base address:0xe000
<Example 3> Display the ISN information on network interfaces of XSCFU#0
XSCF> shownetwork xscf#0-if
xscf#0-if Link encap:Ethernet
inet addr:192.168.10.128
UP BROADCAST RUNNING MULTICAST
RX packets:54424 errors:0 dropped:0 overruns:0 frame:0
TX packets:14369 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B)
Base address:0xe000
<Example 4> Display the takeover IP address information of the XSCF-LAN#0
XSCF> shownetwork lan#0
lan#0
Link encap:Ethernet
inet addr:192.168.1.10
UP BROADCAST RUNNING MULTICAST
Base address:0xe000
HWaddr 00:0A:48:09:C9:0E
Bcast: 192.168.10.255
MTU:1500
TX bytes:2089769 (1.9 MiB)
HWaddr 00:0A:48:09:C9:1E
Bcast:192.168.10.255
MTU:1500
TX bytes:17010 (16.6 KiB)
HWaddr 00:00:00:12:34:56
Bcast:192.168.1.255
MTU:1500
Mask:255.255.255.0
Metric:1
Mask: 255.255.255.0
Metric:1
Mask:255.255.255.0
Metric:1
Chapter 2
Setting Up XSCF
2-25