Fujitsu SPARC EnterpriseM3000 User Manual page 136

TABLE 2-11
Setting Time and Date
TABLE 2-11
Item Description
Display time Displays the time zone and Daylight Saving
zone Time information.
Time zone Sets the time zone and Daylight Saving
Time.
• Standard time zone
• Custom time zone and Daylight Saving
Time
For the abbreviations of time zone and the
name of Daylight Saving Time, specify the
alphabets of 3 letters or more. You can
specify it in the format which complies with
RFC2822.
Display Displays the time and date of the XSCF by
system time the local time or the Coordinated Universal
Time (UTC).
Date and Sets a date and time to a local time or UTC.
time
The specification format is as follows:
• yyyy.mm.dd-HH:MM:SS
• mmddHHMMyyyy.SS
yyyy: Year, mm: Month, dd: Day of the
month, HH: Hour (24-hour system),
MM: Minute, SS: Second
Display NTP Displays NTP server settings
server
settings
NTP server Configures an NTP server for XSCF
network. (In this case, XSCF is an NTP
client.)
Specify the IP address or host name of an
NTP server.
You can synchronize with up to three NTP
servers.
lists the settings and the corresponding shell commands.
Shell Command Remarks
showtimezone
The time zone provided by
settimezone
default is pursuant to
POSIX standard.
The timezone list may be
changed each year. The
setting time zone list can be
referred by specifying "-a"
option.
showdate
The settings can be enabled
setdate
when all of the domains are
powered off.
XSCF reset is done after the
settings.
Synchronization is also
showntp
checked.
No default setting has been
setntp
specified.
When an NTP server is
registered, the existing
setting is deleted and
overwriting is performed
with the specified NTP
server.
If you specify a host name
for an NTP server, the
server name must be
resolvable by DNS server.
Chapter 2 Setting Up XSCF 2-93