3. Use the showlogs power command to check the system power on.
XSCF> showlogs power
Feb 26 14:12:19 JST 2010
Note – Use the showdomainstatus(8) command to check the power status of the
domain.
4.4.2
System Power Off
■
1. Use the showlogs power command to check the power status of the system.
XSCF> showlogs power
Feb 26 14:12:19 JST 2010
2. Use the showdomainstatus(8) command to check the power status of the
system.
XSCF> showdomainstatus -a
DID
00
01
02
03
3. Use the poweroff(8) command to turn off power to all domains.
XSCF> poweroff -a
DomainIDs to power off:00,01,02,03
Continue? [y|n] :y
00 : Powering off
01 : Powering off
02 : Powering off
03 : Powering off
*Note*
This command only issues the instruction to power-off.
The result of the instruction can be checked by the
"showlogs power".
4-14
SPARC Enterprise Mx000 Servers XSCF User's Guide • January 2012
Command operation
Domain Status
Running
Running
Running
Running
System Power On Operator
System Power On Operator
--
Service
--
Service