SpectraLink NetLink e340 Configuration And Administration Manual page 40

SpectraLink Corporation
Answering a call
When the handset rings, the line's icon will flash and row 2 will display the line
number and your dial number. Row 4 will display
incoming call. This example shows a call coming in on line 1.
Press the Start Call
call and allow the SIP server to redirect the call elsewhere, usually to voicemail.
When the call is answered an asterisk (
indicates that this line is in an active call with established audio connection. The
softkeys for
Hold
When a call is placed on hold, an equal character (
softkey displays.
Rsme
When the handset is muted, an
softkey again to restore audio pickup.
Silence the ring
Press the
End Call
ringing will resume with the next incoming call received while the handset is in
standby mode.
Placing a second call on the same line
Only outgoing calls are permitted as the second call on a given line. If there is an
incoming call to the number assigned to the line, the caller will get a busy tone and
be routed to voicemail or to the second appearance of that call number if defined.
PN: 72-1089-02-E.doc
Configuration and Administration—NetLink e340/h340/i640 Wireless Telephone
1
Line 1 [your dial number]
Fr: [caller ID]
Answ Rej
key or the Answ softkey to answer the call. Press
* ) displays at the start of row 4 which
and appear.
Mute
1
Line 1 [your dial number]
*Fr: [caller ID]
Hold
1
Line 1 [your dial number]
=Fr: [caller ID]
Rsme
character replaces the asterisk (
x
1
Line 1 [your dial number]
xFr: [caller ID]
Hold
key to silence the loud ring and convert to in-ear ringing. Loud
Fr (From) and the caller ID of the
Mute End
) replaces the asterisk (
=
Mute End
Mute End
with SIP
Rej to reject the
) and the
*
). Press the
* Mute
Page 40