SpectraLink NetLink e340 Configuration And Administration Manual page 39

SpectraLink Corporation
view the fifth line. Active lines are in bold face. Defined but unregistered lines are
faded. Lines that have been forwarded are prefixed with the greater-than character
( ) followed by the forwarding destination.
>
Softkey functions change as the state of the handset changes. Softkeys are displayed
only when they are available to be activated. Softkeys make usual PBX functions
available on the handset. For example, a call may be placed on hold, the handset may
be muted, and a second line may be activated for an outgoing call or a second call on
the same line may be answered. Calls may also be transferred to another number,
either as a consulted transfer or without consult. Other handset features (DND,
Transfer) may be accessed by pressing the
Number dialing may be specified as alpha or numeric code by pressing
plus the MENU
the dialing string.
Making a call
When the
Start Call
is activated. To select a different line, press the
the standby mode or after pressing
selected and a dial string
The carat ( ) indicates the insertion point for the next character. Up to 80 characters
^
may be entered with automatic scrolling. While in alphanumeric mode, alphabetic
characters can be entered by repeatedly pressing the 1 through 9 keys. Punctuation
characters are available by repeatedly pressing the asterisk (
keys. Row 5 displays the available characters as the key is pressed. Pausing will enter
the highlighted character in the dial string. A space character is available on the
pound key or by pressing the
dial string. The
editing the entry. Press the
point. Insert a character by pressing its key.
Press the softkey or the
Dial
answered, the screen changes to display outgoing call information as shown in this
example.
PN: 72-1089-02-E.doc
Configuration and Administration—NetLink e340/h340/i640 Wireless Telephone
key. Select Alpha Dialing
key is pressed from the standby mode, the first available idle line
Start Call
has been entered with numeric dialing:
12345
1
Line 1
Enter number:
12345
^
Dial <<
>> softkey when the insertion point is at the end of the
and softkeys may be used to position the insertion point for
<< >>
softkey to delete the character prior to the insertion
Dele
Start Call
1
Line 1 [your dial number]
*To: [dialed number]
Hold Rej
FCN key.
if letters and symbols are to be entered in
LINE key plus a number from either
. This example shows that line 1 is
>> Dele
* ), zero (0) or pound (
key to initiate the call. When the call is
Mute
with SIP
Start Call
# )
Page 39