SpectraLink NetLink e340 Configuration And Administration Manual page 30

SpectraLink Corporation
Push-to-talk (PTT) The NetLink i640 Wireless Telephone incorporates PTT
functionality. PTT may be allowed or disallowed in the Admin menu. If allowed, the
user may enable or disable locally and may set the channel, tone volume and audio
volume. The menu for PTT does not appear if PTT is disallowed on the Admin
menu or if no channel is enabled on the Admin menu.
Channel The user may enable any PTT channel that has been allowed in the Admin
menu by entering the corresponding number from the keypad. If PTT has been
enabled in this handset, the default channel is the lowest allowed channel as set in
the Admin menu.
Enable/Disable
disabled by default.
Audio Volume, Tone Volume
and Down side buttons and then pressing the
indicates the levels. The Audio Volume setting may be overridden by adjusting
volume while the handset is in a PTT call.
If PTT is allowed in the Admin menu and enabled by the user, Battery
Pack life when the handset is in standby mode is decreased to about 30
hours.
(Additional options may be present. Contact your system administrator for information.)
PN: 72-1089-02-E.doc
Configuration and Administration—NetLink e340/h340/i640 Wireless Telephone
Channel
Enable/Disable
Audio Volume
Tone V olume
OK
Current Channel – X
1 2 3 4 5 6 7 8
New Channel = ?
The user may enable or disable PTT on this handset. PTT is
PTT Enabled
PTT Disabled
OK
The user may select volume levels by pressing the
Up
Up
Up
OK softkey. The graduated volume bar
with SIP
Up
Page 30