SpectraLink NetLink e340 Configuration And Administration Manual page 23

SpectraLink Corporation
Key Information
Default Key
will be
Key Length
specified for use at this location.
Key 1 through 4
that was entered above. Enter the encryption key as a sequence of
hexadecimal characters. (Use the
F, use the Right Arrow key to advance to the next digit, and the Left Arrow
key to backspace.) For 40-bit keys, enter 10 digits. For 128-bit keys, enter 26
digits. The display will scroll as needed.
Rotation Secret
custom document if this feature is supported in your system.
Cisco FSR (Fast Secure Roaming) In order to provide the highest level of security
without compromising voice quality on Cisco Aironet wireless LAN APs,
SpectraLink and Cisco Systems have cooperated to implement the Fast Secure
Roaming mechanism. FSR is designed to minimize call interruptions for NetLink
Wireless Telephone users as they roam throughout a facility. Existing Aironet 350,
1100, and 1200 APs may require a firmware upgrade to support FSR. Cisco FSR
requires advanced configuration of the Cisco APs in your site. See your Cisco
representative for detailed documentation on configuring the APs and other required
security services on the wired network. To configure Cisco FSR on a handset, you
must enter a Radius Server username and password into each handset.
Username
Usernames are alphanumeric strings, and can be entered using the alphanumeric
string entry technique.
Password
WPA-PSK The security features of WPA (Wi-Fi Protected Access) using PSK (pre-
shared key) are available and may be used if supported by the APs in the facility.
Select either
Passphrase
length or
Direct Entry
The security features of WPA2 (Wi-Fi Protected Access) using PSK are
WPA2-PSK
available and may be used if supported by the APs in the facility. Select either
Passphrase and enter a passphrase between eight and 63 characters in length or
Direct Entry and enter the 256-bit key code.
Consult the Configuration Note for the APs installed in your facility for
information on which of the WPA versions are recommended by SpectraLink
engineering. Configure the recommended version on the AP and select the
corresponding option on the Admin menu.
Regulatory Domain
The Regulatory Domain will default to
requirements dictate that the menu for changing the domain be available by
password, which in this case is the
PN: 72-1089-02-E.doc
Configuration and Administration—NetLink e340/h340/i640 Wireless Telephone
Enter the key number specified for use by the handsets. This
through
1 4
.
Select either 40-bit
Scroll to the key option that corresponds to the
This is used for proprietary WEP key rotation. Refer to your
Enter a username that matches an entry on the Radius server.
Enter the password that corresponds to this Username.
and enter a passphrase between eight and 63 characters in
and enter the 256-bit key code.
LINE
or 128-bit depending on the key length
and keys to access hexadecimal digits A-
2 3
None on the handset display. FCC
key. To change the domain, press
with SIP
Default Key
LINE and
Page 23