Handset Displays - SpectraLink NetLink e340 Configuration And Administration Manual

SpectraLink Corporation

2.10 Handset Displays

Status display area
Displays handset information and available softkeys for the currently selected line.
Text may be truncated if there are more than 18 characters because the handset
display area is 18 characters wide.
LINE display
Pressing the LINE
programmed in the SIP TFTP configuration file. The line appearances are mapped
to corresponding line icons. The
standby mode to activate the handset.
The currently selected line is indicated by an asterisk (
corresponding proxy server has outstanding new mail are flagged with plus (
characters. Exit the
key. The
End Call
other lines while you are participating in a voice call on another line. If the
(resume) softkey is pressed to activate a call on a newly selected line, any previous
active call is placed on hold status.
display
FCN
Pressing the
FCN
available to the user. Included here are transfer and do-not-disturb functions.
MENU display
Pressing the MENU
operating mode of the handset. The currently available options set the data entry
mode during dialing (and during entry of a forwarding number) to either numeric
only or alphanumeric mode.
PN: 72-1089-02-E.doc
Configuration and Administration—NetLink e340/h340/i640 Wireless Telephone
key from the active mode displays a list of line appearances as
LINE key can be pressed while the handset is in the
display by pressing a line number key or by pressing the
LINE
display may be used during a call to examine the status of
LINE
key from the active mode displays a list of telephony options
key from the active mode displays options available for the
). Lines for which the
*
Rsme
with SIP
+ )
Page 15