Name - Roland VS-2000 Owner's Manual

20—Region Editing Operations
If you select a TO location that's before or somewhere in the middle of the project's
currently active playlist, the new playlist is placed on top of the older one, taking the
place of the older playlist wherever they overlap. If you position the new playlist after
the currently active playlist, a new marker is automatically placed at the start of the
new playlist to make it easy to navigate to.
2. Set TO to the desired project location. You can:
To move the now line to the current TO location, press F3 (GO TO).
3. Press F5 (OK) to activate and place the playlist in the project, F1 (<<BACK) to return

NAME

Use: TRACK menu
The VS-2000 allows you to name any of the tracks in a project. The main
NAME screen provides a track selection display where you can select
the track you want to name. To learn about the VS-2000's naming tools,
see "Naming" on Page 74.
Why You'd Use Region NAME
Naming a track allows you to easily identify it on a connected optional VGA display and
when you're selecting tracks during editing.
272
The TO location is the place in the project where the playlist is to start.
• dial in the desired location using the Time/Value dial.
• move the now line to the desired location using the current time location
display at the top of the screen, and then press F2 (GetNow).
to the main ARRANGE screen, or F6 (EXIT) to cancel the ARRANGE operation.
www.Roland.com Roland VS-2000 Owner's Manual
TRACK menu
F5 (NAME)