Saving A Song With The Name You Specify - Roland HP505 Owner's Manual

Saving a Song with the Name You Specify

Immediately after you've finished recording, you can save the song to the memory, song number, and song name that you specify.
* If you want to save to the USB flash drive (sold separately), connect your USB flash drive to the USB memory port before you continue.
1.
Make sure that you've finished recording, and that the screen shown at the right is displayed .
2.
Press the [Song] button .
The media select screen will appear.
3.
Use the [–] [+] buttons to select the save-destination media .
* If a USB flash drive (sold separately) is not connected, you won't be able to select "USB Memory. "
4.
Press the [ ] (Fast) button .
A screen will appear, allowing you to select the song number of save destination.
5.
Use the [–] [+] buttons to select the song number of save destination .
No song has been saved in song numbers shown as (Empty) in the song name column.
Choose a song number in which no song has been saved.
If you want to save your song by overwriting an existing song you no longer need, select the song number of that unwanted song.
6.
Press the [ ] (Fast) button .
A screen will appear, allowing you to specify a name for your song.
7.
Edit the name using the buttons shown in the illustration below .
Use the [ ] (Fast) button to select the position at which you
want to specify a character.
Use the [–] [+] buttons to change the character.
8.
Press the [Song] button to save the song .
If you decide not to save the song, press the [Metronome] button.
NOTE
Never turn off the power or disconnect the USB flash drive while the screen indicates "Working... "
3 5 7
Change the character
4 6 7
Select the character to change
Practicing
2 8
39