Wav File Importing; Playing An Audio Cd - Roland VS-2000 Owner's Manual

Playing an Audio CD

1. Press CD-RW.
2. Press F3 (CDPlyr)—the CD PLAYER screen appears.
3. Insert the desired CD into the drive.
When the CD's not playing, you can use the VS-2000's REW or FF buttons to change
your current location on the CD.
About the CD Player Time Display
To help you locate audio for CD Capture (Page 374), the
CD Player shows the current playback time in two ways:
•
•

WAV File Importing

The VS-2000's WAV Import feature allows you to load linear-format (PCM) WAV audio
files from a data CD. There are many recordings and samples that use Microsoft's WAV
format available on commercial CDs and on the Internet. When you import a WAV file,
you can place it on any track in the current project.
Both Windows and MacOS computers can read WAV files.
Roland VS-2000 Owner's Manual
Drive info
Current
location
Disk info
To:
Play the CD from your current location
Halt playback at the current position
Rewind to the top of the CD
Jump to the start of the next track
Jump to the beginning of the previous track
Eject the CD
Turn off the CD Player feature
<A> ("Absolute" time)—shows the amount of time
since the start of the CD.
<P> ("Program" time)—shows the time since the start
of the current track.
27—Mastering and CD-R/RW Operations
Level meter
Track list
Press:
PLAY
STOP
ZERO
NEXT
PREVIOUS
F3 (EJECT)
F6 (EXIT)
www.RolandUS.com
F3 (CDPlyr)
369