22-Ez Routing; The Ez Routing Screens; Navigating The Ez Routing Screens - Roland VS-2000 Owner's Manual

22—EZ Routing
The EZ ROUTING screens are where you go to set up the connections that allow
signals to travel within the VS-2000. This chapter provides an overview of the EZ
ROUTING screens we've been discussing all along, and describes the VS-2000's helpful
EZ Routing tools.

The EZ ROUTING Screens

There are three EZ ROUTING screens on which routing is performed:

Navigating the EZ ROUTING Screens

To view the EZ ROUTING screens, press EZ ROUTING.
The EZ ROUTING screens have two pages that are identical except for the F buttons
displayed at the bottom of the screen. Press PAGE to toggle between these two sets of F
buttons. One page has a set of F buttons for each EZ ROUTING screen:
•
Press a screen's F button to view the screen.
The other page provides tools for resetting input and hard disk recorder track routings:
•
We'll discuss these on Page 280.
Roland VS-2000 Owner's Manual
LOOP EFFECT ASSIGN
F1 (VIEW) • F3 (OUTPUT) •
F3 (IniTrA) •
EZ ROUTING VIEW
OUTPUT ASSIGN
F4 (EFFECT)
F4 (ClrTrA)
www.RolandUS.com 277