Editing Automix Data; Automix Editing Concepts; The Automix Edit Screen; Targeting Automix Data - Roland VS-2000 Owner's Manual

Editing Automix Data

Automix Editing Concepts

The AUTOMIX EDIT Screen

Automix editing takes place on the AUTOMIX EDIT screen. To get there:
1. While holding down SHIFT, press AUTOMIX.
2. Press F1 (EDIT)—the AUTOMIX EDIT screen appears.
The AUTOMIX EDIT screen presents a playlist that shows the currently targeted
Automix data—we'll explain targeting on the next page. Familiar Home screen tools
appear at the top of the screen (Chapter 8). Edit-related F buttons are visible beneath
the playlist. You can zoom in and out as desired.

Targeting Automix Data

Automix can record and play back more data than can possibly fit onscreen at once.
Targeting allows you to select the Automix data and tracks you want to see and edit.
1. On the AUTOMIX EDIT screen, press F1 (TARGET)—
2. Turn the TIME VALUE dial to highlight the desired
When you select a target, you choose both the desired
Automix track and the parameter whose Automix data
you want to edit.
3. Press ENTER/YES to select the new target data, or EXIT/NO to return to the
4. If you pressed ENTER/YES in Step 3, the newly targeted Automix tracks and data
Roland VS-2000 Owner's Manual
When you cursor
to an Automix
track, and arrow
appears to its
left.
the TARGET SELECT window appears.
target data.
AUTOMIX EDIT screen without changing the targeted Automix data.
appear in the playlist.
www.RolandUS.com
26—Automix
Currently
targeted
Automix data
Automix playlist
347