The Time/Value Dial - Roland VS-2000 Owner's Manual

When the boxes at the bottom of the screen are small rectangles, the F buttons usually:
•
•
•
•
•
Sometimes the boxes at the bottom of the screen are large and
contain icons. When this is the case, press the corresponding F
button to begin an operation or view a menu of related parameters.
In all cases, the label on the display above the F button tells you what the button does.
The labels above the F buttons change when you hold down SHIFT to show the
important screens you can display by pressing the corresponding F button.
Press SHIFT and:
F1
F2
F3
F4
F5
Pages
More parameters may be available than can fit on the display at once. In these
cases, they're arranged over several "pages" on the display. You'll see the Page
symbol in the lower left-hand corner of the display—the display may also show
what look like folder tabs, presenting the available pages as tabbed layers.
Press the PAGE button repeatedly to display each of the available pages.
If you've connected an ASCII keyboard to the VS-2000, you can press its Tab key
instead of the VS-2000's PAGE button.
Param 1, 2, 3 Screens
In some VS-2000 menus, parameter pages are divided further into sub-pages called
"Param1," "Param2," etc. You can select one of these sub-pages by pressing its F button.

The Time/Value Dial

Once you've selected a parameter you want to edit, you can turn the
large, black Time/Value dial to change the parameter's value.
When you're adjusting parameter values with the Time/Value dial, hold
down SHIFT as you turn the dial to move through the available values by
different-sized increments.
You can change your current time location in a project using the Time/Value dial (see
Page 131).
Roland VS-2000 Owner's Manual
display the parameters associated with an operation.
execute an operation.
act as on/off switches.
move the selection cursor to a location on the display.
exit the current screen.
To display the:
Project menu
Track menu
Effect menu
Utility menu
Wave display (when pressed while the Home screen is visible)
Tabs
4—Setting Up and Basic Operations
www.RolandUS.com 69