Basic Scene Operations; Storing A Scene; Recalling A Scene; Changing Scene Banks - Roland VS-2000 Owner's Manual

Basic Scene Operations

You can quickly and easily store and recall scenes using LOCATOR•SCENE
button.
Scenes can be stored and recalled only when a project isn't currently playing.
You can also store and recall scenes from the UTILITY menu (Page 144).
You can use the Scene feature's Safe mode, and perform scene operations more
carefully and slowly from a list in the SCENE window. See Page 145.

Storing a Scene

1. Hold down SHIFT and press LOCATOR•SCENE so it lights red.
2. Press any TRACK/STATUS button to store the scene in the corresponding location.
3. If a location already contains a scene, and you'd like to store a new scene in its

Recalling a Scene

1. Hold down SHIFT and press LOCATOR•SCENE if it's not already lit red.
2. If the current scene bank contains the scene you want, press the scene's lit TRACK/

Changing Scene Banks

1. Hold down SHIFT and press LOCATOR•SCENE if it's not already lit red. If any
2. While holding down SHIFT, hold down LOCATOR•SCENE for two seconds—the
3. Turn the Time Value dial to select the desired scene bank and press ENTER/YES.

Clearing a Scene

1. Hold down SHIFT and press LOCATOR•SCENE if it's not already lit red. If you'd
2. While holding down CLEAR, press the desired scene's TRACK/STATUS button.

Leaving Scene Mode

To leave Scene more manually, press LOCATOR•SCENE so its light turns off.
After you store or recall a scene, the VS-2000 returns the TRACK/STATUS buttons to
their normal job of controlling hard disk recorder tracks (Page 176)—this is intended to
Roland VS-2000 Owner's Manual
Each scene is stored in a numbered location from 1 to 16,
corresponding to the 16 TRACK/STATUS buttons. When a scene has been stored in
a location, the corresponding TRACK/STATUS button is lights in Scene mode.
If you'd like to store the scene in a different scene bank, follow the instructions in
"Changing Scene Banks" and press its button in the selected bank.
place, you'll have to clear the older scene first. See "Clearing a Scene" on Page 143.
STATUS button. To recall a scene from a different bank, follow the instructions in
"Changing Scene Banks" and then press the scene's button in the desired bank.
scenes are stored in the currently selected scene bank, their TRACK/STATUS
buttons light.
SCENE BANK SELECT window pops open.
like to clear a scene from a different bank, see the instructions in "Changing Scene
Banks" before proceeding.
The scene is cleared from that location, and the button's light turns off.
10—Using the Digital Mixer
www.RolandUS.com
+
143