Exporting Tracks And Phrases As Wav Files; Exporting Tracks As Wav Files - Roland VS-2000 Owner's Manual

27—Mastering and CD-R/RW Operations

Exporting Tracks and Phrases as WAV Files

If you want to move audio from a project to an external device—such as a computer or
sampler—that reads WAV files, you can export any track or phrase as a WAV file. The
exported audio is written onto a data CD.
Since most audio programs can read WAV files, you can process exported VS-2000
audio using virtually any audio processing or editing software. Afterwards—and after
saving the result as a WAV file—you can re-import the audio back into the VS-2000.
When you want to export an entire track, use the Track Export feature. To export
portions of a track, use the VS-2000's phrase editing tools to fashion the audio into a
phrase, and use the Phrase Export feature.
The VS-2000 exports each pair of linked tracks as a stereo WAV file.
The procedures for exporting tracks and phrase start a bit differently, but end on the
the same CD-burning screen.

Exporting Tracks as WAV Files

1. Insert a blank CD-R or CD/RW into your CD burner.
2. On the CD-RW MASTERING MENU screen (Page 364), press F5
3. To select a V-Track for export on the Select Track screen, turn the Time/Value dial to
Turning the Time/Value dial takes you through each of the project's V-Tracks. Hold
down SHIFT as you turn to jump between same-numbered V-Tracks on different tracks.
372
(TrkExp) for "Track Export"—the TRACK EXPORT Select Track screen
appears.
V-Tracks
On this screen, you see a list of all of the project's V-Tracks. To the right is a V-Track
map that shows you which V-Tracks contain data. When you export a track as a
WAV file, you're really exporting a V-Track—see Chapter 6 for an explanation of the
relationship between tracks and V-Tracks.
You can select the V-Tracks you want to export on TRACK EXPORT's Select Track
screen or on its V-Track Map screen, described on the next page. You can mark as
many V-Tracks for export as you want on either screen.
highlight the V-Track and press F4 (MARK) to place a checkmark next it. You can
toggle on or off the selection status of all V-Tracks that contain data by pressing F3
(ALL)—this can be handy if you want to export all of your tracks as WAV files.
www.Roland.com
Read-only
V-Track Map
Roland VS-2000 Owner's Manual
F5 (TrkExp)