Working In The Vs-2000 Mastering Room; Navigating To The Mastering Room; Turning On The Mastering Room; Selecting The Mastering Room Operating Mode - Roland VS-2000 Owner's Manual

Working in the VS-2000 Mastering Room

Navigating to the Mastering Room

1. While holding down SHIFT, press CD-RW. The MASTERING

Turning On the Mastering Room

To turn on the Mastering Room:
1. Set the MASTERING ROOM on/off switch to On.
2. To de-activate the Mastering Room, set its switch to Off.
When the Mastering Room is turned on, the CD-RW button flashes.

Selecting the Mastering Room Operating Mode

The Mastering Room's operating mode is determined by the setting of its STATUS
parameter. You can select:
•
•

Selecting the Mastering Tracks' Recording Mode

When the CDR Rec Mode parameter is turned on, your mastering tracks are recorded
as disk image files that can be immediately burned to an audio CD (Page 356). When it's
turned off, the mastering tracks are recorded using the project's recording mode.
Typically, you'll want to set CDR Rec Mode to On.
Roland VS-2000 Owner's Manual
ROOM screen appears.
Play—to play back already recorded mastering tracks.
Record—to record new mastering tracks.
27—Mastering and CD-R/RW Operations
Mastering room
parameters
Project playlist
Navigation buttons
www.RolandUS.com
+
359