Setting The Save Destination And Song Name - Roland FP-50 Owner's Manual

Recording Your Performances
Starting and stopping recording
1.
Press the [ ] button .
Recording starts and the [REC] and [
2.
Press the [ ] button .
Recording stops, and the save confirmation screen appears.
MEMO
• When an ending is playing and the rhythm stops, or when
performing until the end of a song, recording continues so that
the final sustained sound is recorded, and therefore recording
does not stop automatically.
• If you want to check your performance, press the [
button in the save confirmation screen to start playback.
Saving a recorded performance
1.
Press the [ ] (FAST) button .
The recording is saved on the USB flash drive.
By default, the recorded song is given the name "AUDIO. "
NOTE
Do NOT turn off the power or disconnect the USB flash drive
while "Working. " is displayed.
MEMO
You can select the save location and song name for your
recording (p. 26).
Erasing a recorded performance
1.
Press the [ ] (SLOW) button .
A confirmation message appears.
If you decide not to erase the performance, press the [ ] (SLOW)
button once again.
2.
Press the [ ] (FAST) button .
The recording is erased.
Listening to a recorded performance
1.
Press the [ ] button .
Playback starts from the beginning of the recorded performance.
26
Setting the Save Destination and
Song Name
] buttons light.
]
You can select the save destination and song name for your
recording.
1.
Confirm that the save confirmation screen is displayed,
and press the [METRONOME] button .
2.
Press the [–] [+] buttons to select the desired storage
location .
Display Storage location
U (User) Internal memory
S (USB) USB flash drive
* Audio data cannot be saved in internal memory.
* "S (USB)" is available only if a USB flash drive (sold separately) is
connected to the USB MEMORY port.
3.
Press the [ ] (FAST) button .
The selection screen appears, so that you can set the destination-
side song number for the recording.
4.
Press the [–] [+] buttons to select the song number at the
save destination .
If a song name is displayed when you select a song number, a song
has already been saved in that number. If you select a song number
that already contains a song, the recorded song will be overwritten.
If you do not want to overwrite the previously recorded song, select
a song number that displays "(Empty)" as the song name.
5.
Press the [ ] (FAST) button .
The Entry screen appears, where you can enter the desired song
name.
6.
Change the song name .
Button Operation
[–] [+] buttons Change the character.
[ ] [ ] (SLOW/FAST)
Select the character to change.
buttons
* Note that character availability varies according to whether you
are saving an SMF file or an audio file.
If you decide not to save the song, press the [REC] button.
7.
Press the [METRONOME] button .
The song is saved.
NOTE
Do NOT turn off the power or disconnect the USB flash drive
while "Working. " is displayed.