Roland VS-2000 Owner's Manual page 42

2—Getting Around
5—AUTOMIX Button
Press this button to turn Automix on (lit) or off (unlit). Hold down SHIFT and press
AUTOMIX to view the AUTOMIX SETUP screen. See Chapter 26, starting on Page 341.
6—UNDO•REDO Button
The VS-2000 allows you to reverse—or "undo"—up to 999 of your last recording or
editing actions. Press the UNDO•REDO button to view the Undo dialog. After undoing
any action, you can also "redo" it by pressing UNDO•REDO while holding down
SHIFT—the Redo dialog appears.
7—IN Button
Press the IN button to set the current position of the now line as the start of a region of
data you want to edit. Hold down A.PUNCH and press IN to set the punch-in point
during Auto Punch operations.
8—OUT Button
Press the OUT button to set the current position of the now line as the end of a region
of data you want to edit. Hold down A.PUNCH and press OUT to set the punch-out
point during Auto Punch operations.
9—A. PUNCH Button
Press this button to activate (lit) or de-activate (unlit) Auto Punch. See Page 190.
10—FROM Button
Press FROM to select the current position of the now line as a time-reference point in a
section of data to be moved or copied. When looping, press FROM while holding down
LOOP when the now line's at the location you want to use as the start of your loop.
11—TO Button
Press TO to select the current position of the now line as a location at which you want
the FROM point to be placed when data is moved or copied. When looping, press TO
while holding down LOOP when the now line's at the location you want to use as the
end of your loop.
IN, FROM, OUT and TO work together, playing a part in a variety of editing operations.
They're discussed as a group in Chapter 18, on Page 236.
12—LOOP Button
Press this button to turn looping on (lit) or off (unlit). See Page 178.
13— PREVIOUS Button
Press PREVIOUS to move the now line to the beginning of the currently selected track
phrase or to the end of the phrase immediately before it. Hold down SHIFT and press
PREVIOUS to move the now line back in time to the nearest marker.
You can reverse the behavior of this button by resetting the UTILITY menu's
PREVIOUS/NEXT Sw parameter, described on Page 379.
42 www.Roland.com Roland VS-2000 Owner's Manual