Selecting, Editing And Creating A Rhythm Arrange; Selecting A Rhythm Arrange; Creating Or Editing A Rhythm Arrange - Roland VS-2000 Owner's Manual

Selecting, Editing and Creating a Rhythm Arrange

Selecting a Rhythm Arrange

To select a rhythm arrange:
1. Press RHYTHM TRACK to display the RHYTHM TRACK screen.
2. Cursor to the SELECT RHYTHM ARRANGE area and set Group to the type of
3. Select No. (to the right of Group) and turn the Time/Value dial to select the desired
When you've turned on the Rhythm Track and are playing project, you can revisit this
screen to see the name of the currently playing pattern in the Now Playing PATTERN
area.

Creating or Editing a Rhythm Arrange

Creating and editing a rhythm arrange are really the same process, since you always
start with the currently selected rhythm arrange
Temporary Rhythm Arrange Memory
When you modify a rhythm arrange, it's automatically copied into a special area of
temporary memory within the VS-2000. Any changes to make to the rhythm arrange are
made to this copy. Its name changes to "TEMP" to show this. When you're satisfied with
your work, save the rhythm arrange in the user or project Rhythm Track memory.
Once you begin editing an existing rhythm arrange, the VS-2000 holds it in a special
temporary memory area—the display shows "TEMP" at the front of the rhythm
arrange's name. To avoid losing your work, save the rhythm arrange to user or project
memory before selecting a different rhythm arrange or turning off the VS-2000. See
"Saving a Rhythm Arrange" on Page 311.
1. Press RHYTHM TRACK to display the RHYTHM TRACK screen.
2. To create a new rhythm arrange from scratch, select USER 1—Empty Arrange.
3. Press F2 (EDIT) to display the RHYTHM ARRANGE EDIT screen.
4. If you're creating a new rhythm arrange, press
5. Press
Roland VS-2000 Owner's Manual
rhythm arrange you wish to use: preset, user or project.
rhythm arrange. The select rhythm arrange's name appears just below the Group
and No. parameters.
Otherwise, select the rhythm arrange you wish to edit.
ARRANGE EDIT area and turn the Time/Value dial to Measure 1. If you're editing a
rhythm arrange, select a measure whose rhythm pattern you wish to change.
to highlight the Group parameter and select the type of pattern you wish
to use at Measure 1.
24—Using the Rhythm Track
RHYTHM PATTERN
area
ARRANGE EDIT
area
to highlight MEASURE in the
www.RolandUS.com 309