Turning Off The Rhythm Track - Roland VS-2000 Owner's Manual

6. If you wish to save the current state of your project, press ENTER/YES. Otherwise,
7. When the VS-2000 pops open its CD-RW drive and asks you to insert the Rhythm
8. Use the cursor buttons to highlight the data you wish to recover, and press F1
9. Set CD Speed as desired. We recommend trying the maximum CD speed; if you
10. Press F5 (OK)—the VS-2000 asks you to confirm the you want to proceed.
Rhythm track data you recover replaces any user rhythm arranges or rhythm patterns
currently stored in the selected partition, so be careful not to replace data you wish to
preserve.
11. Press ENTER/YES to complete the recovery, or EXIT/NO to cancel the operation.

Turning Off the Rhythm Track

1. Press RHYTHM TRACK.
2. Set TRACK 17/18 Assign to Audio.
3. Press F6 (EXIT).
Roland VS-2000 Owner's Manual
press EXIT/NO.
Track user backup CD you wish to recover, insert the disk in the drive, close the
drive, and press ENTER/YES—the RHYTHM TRACK USER BACKUP screen
appears.
(MARK) to checkmark it.
have any problems, lower the speed and try again.
When recovery is finished, the VS-2000 displays the RHYTHM TRACK screen.
24—Using the Rhythm Track
www.RolandUS.com 323