Working On The Rhythm Pattern Setup Screen - Roland VS-2000 Owner's Manual

24—Using the Rhythm Track

Working on the RHYTHM PATTERN SETUP Screen

1. Navigate to the RHYTHM TRACK screen (Page 307).
2. Press F1 (Pattrn) to display the RHYTHM PATTERN SETUP screen.
3. To select the rhythm pattern you wish to use as the basis for recording or editing,
4. Set BEAT to the desired time signature. Notes in the pattern are moved to fit the
5. Set the pattern's length by setting the MEASURE parameter.
6. You can add a "swing" feel to the pattern. Select the type of swing by setting the
When a pattern is set to swing, its notes are slightly delayed as part of the swing effect,
even though they haven't actually been moved. When you edit a pattern with swing, its
note positions therefore don't correspond absolutely to where they're heard.
314
set the Group parameter to the desired pattern type—PRESET, USER or
PROJECT—and then set No. to the desired individual pattern within the selected
group. The Name area beneath these two parameters show the currently selected
pattern's name.
new time signature.
desired rhythm value for the SWING parameter, and set its strength by adjusting
the AMOUNT parameter value (50% equals no swing).
www.Roland.com Roland VS-2000 Owner's Manual