Rhythm Arrange Copying; Copying A Rhythm Arrange - Roland VS-2000 Owner's Manual

24—Using the Rhythm Track
4. Choose a specific memory location within the selected group as the place your
5. If you want to name the rhythm arrange, press F1 (NAME) and do so—see
6. Press F5 (OK)—the VS-2000 asks you to confirm your decision to save the rhythm
7. Press ENTER/YES to proceed, or EXIT/NO to cancel the operation.

Rhythm Arrange Copying

You can copy a rhythm arrange to another memory location. This allows you to:
•
•
•

Copying a Rhythm Arrange

1. Press RHYTHM TRACK to display the RHYTHM TRACK screen.
2. If "COPY" isn't visible above F1, press the PAGE button so it is.
3. Press F1 (COPY)—the RHYTHM ARRANGE COPY screen appears.
4. In the SOURCE RHYTHM ARRANGE area, select the desired rhythm arrange
5. In the DESTINATION RHYTHM ARRANGE area, select desired rhythm arrange
6. Press F5 (OK)—the VS-2000 asks if you're sure. Proceeding with the operation will
7. To finish copying the rhythm arrange, press ENTER/YES.
312
rhythm arrange is to be stored. The rhythm arrange currently residing in that
location is displayed beneath the Group and No. parameters.
"Naming" on Page 74 for details. After naming the rhythm arrange, press F6 (EXIT)
to return to the RHYTHM ARRANGE SAVE screen.
arrange in the selected location.
create a safety copy of a rhythm arrange with which you want to experiment.
copy a user rhythm arrange into a specific project.
copy a project rhythm arrange in user memory so you can use it with other projects.
group, and then the individual rhythm arrange you wish to copy.
group, and then specific memory location in which you want to store the rhythm
arrange copy. The name of the rhythm arrange currently residing in the selected
location is displayed beneath the Group and No. parameters.
replace any rhythm arrange currently residing in the selected destination location.
www.Roland.com
Source rhythm
arrange
Destination
rhythm arrange
Roland VS-2000 Owner's Manual