Margin Shift Copy - Sharp MX-M260 Operation Manual

CONVENIENT COPY FUNCTIONS

MARGIN SHIFT COPY

The margin shift function is used to automatically shift the text or image on the copy paper approximately 10 mm
(1/2") in its initial setting.
One-sided copying
Two-sided copying
Or
1
Touch the [MARGIN SHIFT] key in the
special modes screen.
MARGIN SHIFT
PAMPHLET COPY
2
Select the shift direction.
RIGHT LEFT DOWN
42
Image shifted Image shifted
to the right to the left
Margin
Image shifted Image shifted
to the right to the left
Margin
The margin shift setting
screen will appear.
The margin shift icon
( , etc.) will also
appear in the screen to
indicate that the function
is turned on.
Touch the [RIGHT],
[LEFT], or [DOWN] key.
The selected key will be
highlighted.
Image shifted
down
Margin
Image shifted
down
Margin
3
Adjust the shift width as needed and
touch the [OK] key.
CANCEL
SIDE 1
(0 20)
10
mm
4
Touch the [OK] key in the special
modes screen.
You will return to the main screen of copy mode.
About the steps that follow
If you are using the document glass, see page 23.
If you are using the RSPF, see page 24.
Note
• Right, left or down can be
selected for the shift direction
as shown in the illustration.
Margin
• The shift width (margin) can
be set from 0 mm to 20 mm
increments of 1 mm (0" to 1"
in increments of 1/8").
• If [DOWN] key is selected, set
the original(s) so that the
margin to be increased is set
to the rear side of the RSPF
or the document glass.
Margin
Use the
OK
to set the shift width. The
shift amount can be set
OK
SIDE 2 from 0 mm to 20 mm
(0 20)
increments of 1 mm (0"
10
mm
to 1" in increments of
1/8").
• When margin shift is selected, rotation
copying will not function.
• This feature cannot be used with paper that
is not a standard size.
• To cancel the margin shift function, touch
the [CANCEL] key in the margin shift
setting screen. (See the screen of step 3.)
and keys