Configuring H.323 - TANDBERG VCS Administration Manual

Working with H.33 Text goes here
H.323 settings are configured via:
•
VCS Configuration > Protocols > H.323.
You will be taken to the H.323 page.
•
xConfiguration H323
H.323 Mode
Determines whether or not the VCS will
provide H.323 gatekeeper functionality.
Registration UDP port
Specifies the port to be used for H.323 UDP
registrations.
Call signaling TCP port
Specifies the port that listens for H.323 call
signaling.
Call signaling port range start
Specifies the lower port in the range to
be used by H.323 calls once they are
established.
Call signaling port range end
Specifies the upper port in the range to
be used by H.323 calls once they are
established.
Save
Click here to save your changes.
Getting System
Introduction
Started Overview
D 14049.01
07.2007
Configuring H.33
System H.323 & SIP H.323 & SIP Registration
Configuration Configuration Configuration Control
Zones and Call
Neighbors Processing
34
TANDBERG TANDBERG VIDEO COMMUNICATION SERVER VIDEO COMMUNICATION SERVER
ADMINISTRATOR GUIDE ADMINISTRATOR GUIDE
Registration conflict mode
Determines how the system will behave if
an endpoint attempts to register an alias
currently registered from another IP address.
Reject: denies the registration.
Overwrite: deletes the original registration and
replaces it with the new registration.
Time to live
Specifies the interval (in seconds) at which an
H.323 endpoint must re-register with the VCS
in order to confirm that it is still functioning.
Call time to live
Specifies the interval (in seconds) at which
the VCS polls the endpoints in a call to verify
that they are still in the call.
Auto discover
Determines whether or not the VCS responds
to gatekeeper discovery requests from
endpoints.
Firewall Bandwidth
Maintenance
Traversal Control
Appendices