Configuring Neighbor Zones - TANDBERG VCS Administration Manual

Managing Zones, Neighbors and Alternates
H.323 mode
Determines whether H.323 calls will be
allowed to and from the neighbor zone.
H.323 port
Specifies the port on the neighbor system to
be used for H.323 calls to and from the local
VCS.
This must be the same port number as
that configured on the neighbor system
as its H.323 UDP port.
SIP mode
Determines whether SIP calls will be allowed
to and from the neighbor zone.
SIP port
Specifies the port on the neighbor system
to be used for SIP calls to and from the local
VCS.
This must be the same port number as
that configured on the neighbor system
as its SIP TCP or SIP TLS port
(depending on which SIP transport mode is in
use).
SIP transport
Determines which transport type will be used for SIP calls to
and from the neighbor zone.
Getting System
Introduction
Started Overview
D 14049.01 D 14049.01
07.2007 07.2007

Configuring Neighbor Zones

Primary address
Enter the IP address or FQDN of the neighbor system.
System H.323 & SIP Registration
Configuration Configuration Control
Alternate 1 to Alternate 5 address
Enter the IP addresses or FQDNs of all Alternates configured on
the neighbor system.
Zones and Zones and Call
Neighbors Neighbors Processing
54 54
TANDBERG VIDEO COMMUNICATION SERVER
ADMINISTRATOR GUIDE
Firewall Bandwidth
Maintenance
Traversal Control
Appendices