TANDBERG VCS Administration Manual page 142

Video communication server
Hide thumbs Also See for VCS:
Table of Contents

Advertisement

Command Reference - xConfiguration
Text goes here
Zones
LocalZone
cont...
cont...
Getting
System
Introduction
Started
Overview
D 14049.01
07.2007
SubZone [..00]
Bandwidth
cont...
cont....
Name: <S: , 50>
Assigns a name to this subzone.
Subnet [..5]
Traversal
H33
System
H.323 & SIP
Registration
Configuration
Configuration
Total
Mode: <None/Limited/Unlimited>
Determines whether this subzone has a limit on the total bandwidth of calls being
used by its endpoints at any one time.
None
: no bandwidth will be available.
Limited
: there will be a limit on the bandwidth.
Unlimited
Limit: <..00000000>
(applies only if Mode is set to Limited)
Sets the total bandwidth limit (in kbps) of this subzone.
IP
Address: <S: 0, 39>
Specifies an IP address used (in conjunction with the IP Prefix Length) to identify a subnet to be
assigned to this subzone.
PrefixLength: <0..128>
Specifies the number of bits of the Subnet IP address which must match for an IP address to
belong in this subzone.
Assent
Mode: <On/Off>
Determines whether or not H.323 calls using Assent mode for firewall traversal will
be allowed. Applies to traversal-enabled endpoints registered directly with the VCS.
On
: calls using Assent mode will be allowed.
Off
: calls using Assent mode will not be allowed.
H4608
Mode: <On/Off>
Determines whether or not H.323 calls using H.460.18 mode for firewall traversal
will be allowed. Applies to traversal-enabled endpoints registered directly with the
VCS.
On
: calls using H.460.18 mode will be allowed.
Off
: calls using H.460.18 mode will not be allowed.
H4609
Demultiplexing
Zones and
Call
Control
Neighbors
Processing
4
TANDBERG
TANDBERG
TANDBERG
VIDEO COMMUNICATION SERVER
VIDEO COMMUNICATION SERVER
VIDEO COMMUNICATION SERVER
: there will be no limit on the bandwidth.
Mode: <On/Off>
Determines whether the VCS will operate in Demultiplexing
mode for calls from traversal-enabled endpoints registered
directly with it.
On
: allows use of the same two ports for all calls.
Off
: Each call will use a separate pair of ports for media.
Firewall
Bandwidth
Traversal
Control
ADMINISTRATOR GUIDE
ADMINISTRATOR GUIDE
ADMINISTRATOR GUIDE
Maintenance
Appendices
Appendices
Appendices

Advertisement

Table of Contents
loading

Table of Contents