Passwords; Changing The Administrator Password; System Snapshot; About The System Snapshot - TANDBERG VCS Administration Manual

Maintenance Text goes here

Changing the Administrator Password

To change the password used to log in to the VCS:
•
Maintenance >

Passwords.

You will be taken to the Passwords page.
You must restart the system for changes to take effect.
New password
Enter your new password here.
Retype new password
Retype your new password here.
Delete password
Click here to reset the Administrator Password to a blank field.

About the System Snapshot

The system snapshot is used for diagnostic purposes. It is a
file that can be sent to your system support representative at
their request to assist them in troubleshooting issues you may
be experiencing.

Creating a System Snapshot

To create a system snapshot file:
•
Maintenance > System Snapshot.
You will be taken to the

System Snapshot

Create System Snapshot
Click on the
Save the resulting file to an appropriate location.
Getting System
Introduction
Started Overview
D 14046.01
07.2007
page.
button.
System H.323 & SIP
Configuration Configuration
Passwords
System Snapshot
Registration Zones and Call
Control Neighbors Processing
7
TANDBERG TANDBERG VIDEO COMMUNICATION SERVER VIDEO COMMUNICATION SERVER
ADMINISTRATOR GUIDE ADMINISTRATOR GUIDE
Firewall Bandwidth
Maintenance Maintenance
Traversal Control
Appendices