Configuring A Subzone - TANDBERG VCS Administration Manual

Bandwidth Control Bandwidth Control
To configure a subzone:
•
VCS Configuration > Local Zone > Subzones.
You will be taken to the Subzones page.
Click on the subzone you wish to configure.
You will be taken to the Edit Subzone
•
xConfiguration Zones LocalZone SubZone
Name
Enter the name you wish to assign to the subzone. You will
refer to this name when creating Links and Pipes.
Subnet 1
Enter the subnet IP Address and Prefix, This will define the
range of IP addresses that will belong to this subzone.
Subnet 2 - 5
Use these fields to define up to 4 further subnets for this
Subzone.
Bandwidth
See Applying Bandwidth Limitations to Subzones
description of these fields.
Save
Click here to save your changes.
Getting System
Introduction
Started Overview
D 14049.01
07.2007
page.
for a
System H.323 & SIP
Configuration Configuration

Configuring a Subzone

Registration Zones and Call
Control Neighbors Processing

TANDBERG TANDBERG VIDEO COMMUNICATION SERVER VIDEO COMMUNICATION SERVER
ADMINISTRATOR GUIDE ADMINISTRATOR GUIDE
Firewall Bandwidth Bandwidth
Maintenance
Traversal Control Control
Appendices