Configuring Zones - All Types - TANDBERG VCS Administration Manual

Managing Zones, Neighbors and Alternates
Name
Assigns a name to the zone. The name acts as a unique
identifier, allowing you to distinguish between zones of the
same type.
Type
Determines the nature of the specified zone in relation to the
Local Zone.
Neighbor : the new zone will be a neighbor of the Local Zone.
TraversalClient : there is a firewall between the zones, and the
Local Zone is a traversal client of the new zone.
TraversalServer
: there is a firewall between the zones and the
Local Zone is a traversal server for the new zone.
ENUM : the new zone contains endpoints discoverable by ENUM
lookup.
DNS
: the new zone contains endpoints discoverable by DNS
lookup.
Once the zone has been created, the Type
Hop count
The hop count is the number of times a search request will be
forwarded to a neighbor gatekeeper or proxy (see
for more information). This field specifies the hop count to be
used when sending an alias search request to this particular
zone.
If the search request was received from another zone
and already has a hop count assigned, the lower of the
two values will be used.
Match1 - Match5
Match
The sections allow you to configure when and how
search requests will be sent to this zone, and also whether any
transforms will be applied to aliases being searched for in this
zone. These features are described in full in the section
searching and alias transforming.
Getting System
Introduction
Started Overview
D 14049.01 D 14049.01
07.2007 07.2007

Configuring Zones - All Types

cannot be changed.
Hop Counts
Zone
System H.323 & SIP
Configuration Configuration
Registration Zones and Zones and Call
Control Neighbors Neighbors Processing
53 53
TANDBERG VIDEO COMMUNICATION SERVER
ADMINISTRATOR GUIDE
Firewall Bandwidth
Maintenance
Traversal Control
Appendices