Configuring Stun Services - TANDBERG VCS Administration Manual

Firewall Traversal

Configuring STUN Services

To configure the STUN Binding Discovery and
STUN Relay services:
•
VCS Configuration > Border Controller >
STUN.
You will be taken to the STUN page.
•
xConfiguration Traversal Server
STUN
Getting System
Introduction
Started Overview
D 14049.01
07.2007
STUN Services
System H.323 & SIP Registration
Configuration Configuration Control
Zones and Call
Neighbors Processing
08 08
TANDBERG VIDEO COMMUNICATION SERVER
ADMINISTRATOR GUIDE
STUN discovery mode
Determines whether the VCS will offer STUN
Discovery services to traversal clients.
STUN discovery port
Specifies the port on the VCS on which it will
be listening for STUN Discovery requests.
STUN relay mode
Determines whether the VCS will offer STUN
Relay services to traversal clients.
STUN relay port
Specifies the port on the VCS on which it will
be listening for STUN relay requests.
STUN relay media port start
Specifies the lower port in the range to be
used for STUN media relay.
STUN relay media port end
Specifies the upper port in the range to be
used for STUN media relay.
Save
Click here to save your changes.
Firewall Firewall Bandwidth
Maintenance
Traversal Traversal Control
Appendices