Editing Pipes - TANDBERG VCS Administration Manual

Bandwidth Control Bandwidth Control
Editing an Existing Pipe
To configure details of a pipe:
•
VCS Configuration > Bandwidth > Pipes
You will be taken to the Pipes page.
Click on the pipe you wish to configure.
You will be taken to the Edit Pipe page.
•
xConfiguration Bandwidth Pipe
Getting System
Introduction
Started Overview
D 14049.01
07.2007

Editing Pipes

System H.323 & SIP Registration
Configuration Configuration Control
Zones and Call
Neighbors Processing
5
TANDBERG TANDBERG VIDEO COMMUNICATION SERVER VIDEO COMMUNICATION SERVER
ADMINISTRATOR GUIDE ADMINISTRATOR GUIDE
Name
Enter the name you wish to give to this pipe.
You will refer to this name when creating links.
Total bandwidth mode
Determines whether there is a limit on the
total concurrent bandwidth of this pipe.
Unlimited: no limitations are in place.
Limited: there is a limit in place; you must
enter the limit in the field below.
None: there is no bandwidth available.
Total bandwidth (kbps)
Sets the limit on the total concurrent
bandwidth of this pipe.
Per call bandwidth mode
Determines whether there is a limit on the
bandwidth of individual calls via this pipe.
Unlimited: no limitations are in place.
Limited: there is a limit in place; you must
enter the limit in the field below.
None: there is no bandwidth available.
Per call bandwidth (kbps)
Sets the limit on the bandwidth of individual
calls via this pipe.
Delete
Click here to delete the pipe.
Save
Click here to save the changes.
Firewall Bandwidth Bandwidth
Maintenance
Traversal Control Control
Appendices