TANDBERG VCS Administration Manual page 147

Command Reference - xConfiguration Text goes here
Zones Zone [..00]
cont... cont...
Getting System
Introduction
Started Overview
D 14049.01
07.2007
TraversalClient SIP
cont...
TraversalServer Authentication
H33
SIP
System H.323 & SIP Registration
Configuration Configuration
Port: <04..65534>
Specifies the port on the traversal server to be used for SIP calls from this VCS.
Transport: <TCP/TLS>
Determines which transport type will be used for SIP calls to and from the traversal server.
TCP : TCP will be used.
TLS : TLS will be used.
UserName: <S: , 8>
If the traversal client is a VCS, this must be the VCS's Authentication User Name. If the traversal client is a
gatekeeper, this must be the gatekeeper's System Name.
H4609 Demultiplexing
Port: <04..65534>
Specifies the port on the VCS being used for H.323 firewall traversal from this traversal client.
Protocol: <Assent/H4608>
Determines the protocol to be used for calls from the traversal client.
Assent
: the Assent protocol will be used.
H46018 : the H.460.18 protocol will be used.
Port: <04..65534>
Specifies the port on the VCS being used for SIP firewall traversal from this traversal client.
Transport: <TCP/TLS>
Determines which of the two transport types will be used for SIP calls between the traversal client and VCS.
TCP
: TCP will be used.
TLS : TLS will be used.
Zones and Call
Control Neighbors Processing
47
TANDBERG TANDBERG TANDBERG VIDEO COMMUNICATION SERVER VIDEO COMMUNICATION SERVER VIDEO COMMUNICATION SERVER
ADMINISTRATOR GUIDE ADMINISTRATOR GUIDE ADMINISTRATOR GUIDE
Mode: <On/Off>
Determines whether the VCS will operate in Demulti-
plexing mode for calls from the traversal client.
On : allows use of the same two ports for all calls.
Off : Each call will use a separate pair of ports for
media.
Firewall Bandwidth
Maintenance
Traversal Control
Appendices Appendices Appendices