Configuring Ldap Server Settings - TANDBERG VCS Administration Manual

Registration Control Text goes here

Configuring LDAP Server settings

To configure the settings for accessing the
LDAP server:
•
VCS Configuration > Authentication > LDAP
> Configuration.
You will be taken to the LDAP Configuration
page.
•
xConfiguration LDAP
•
xConfiguration Authentication
LDAP
Alias origin
Determines the source of the alias(es) with
which the endpoint will be registered.
LDAP: The aliases listed in the LDAP database
for the endpoint's username will be used;
those presented by the endpoint will be
ignored.
Endpoint: The aliases presented by the
endpoint will be used; any in the LDAP
database will be ignored.
Combined: The endpoint will be registered
both with the aliases which it has presented
and with those configured in the LDAP
database.
The default is LDAP.
Getting System
Introduction
Started Overview
D 14049.01
07.2007
Authentication
System H.323 & SIP Registration Registration
Configuration Configuration Control Control
Zones and Call
Neighbors Processing
43
TANDBERG TANDBERG VIDEO COMMUNICATION SERVER VIDEO COMMUNICATION SERVER
ADMINISTRATOR GUIDE ADMINISTRATOR GUIDE
Server IP address
The IP address or FQDN of the LDAP server.
Port
The IP port of the LDAP server.
UserDN
The user distinguished name to be used by
the VCS when binding to the LDAP server.
Password
The password to be used by the VCS when
binding to the LDAP server.
Base DN
The area of the directory on the LDAP server
to be searched for the credential information.
This should be specified as the Distinguished
Name (DN) in the LDAP directory under which
the H.350 objects reside.
Encryption
Determines whether the connection to the
LDAP server will be encrypted. (For more
information on configuring encryption, see
Securing the LDAP connection with
TLS
: TLS Encryption will be used for the
connection with the LDAP server.
Off : No encryption will be used.
The default is Off.
Firewall Bandwidth
Maintenance
Traversal Control
TLS.)
Appendices