Authentication Using A Local Database; Configuring The Local Database - TANDBERG VCS Administration Manual

Registration Control Text goes here
Authentication using a Local
Database
The local database is included as part of
your VCS system. It consists of a list of
usernames and passwords, which you add
via the web interface and/or the CLI. The
database can hold up to 2500 entries.

Configuring the Local Database

To manage entries in the Local Database:
•
VCS Configuration > Authentication >
Local Database.
You will be taken to the Credentials page.
•
xConfiguration Authentication
Credential
•
xCommand CredentialAdd
•
xCommand CredentialDelete
New
New
Select to add a new entry to the Local
Database. You will be taken to the Create
Credential page.
Name
The username used by the endpoint when
authenticating with the VCS.
Password
The password used by the endpoint when
authenticating with the VCS.
Create Credential
Select Create Credential to add the new
entry to the Local Database and return to the
Credentials page.
Getting System
Introduction
Started Overview
D 14049.01
07.2007
Authentication
System H.323 & SIP Registration Registration
Configuration Configuration Control Control
Zones and Call
Neighbors Processing
44
TANDBERG TANDBERG VIDEO COMMUNICATION SERVER VIDEO COMMUNICATION SERVER
ADMINISTRATOR GUIDE ADMINISTRATOR GUIDE
Credentials
The Credentials page shows all the existing
entries in the Local Database.
You can sort these entries by clicking
on the Name column heading.
View/Edit
View/Edit
Select to add a make changes to
an existing entry. You will be taken to the
Credential page.
Cancel
Returns you to the Credentials
saving your changes.
Delete
Removes the entry from the Local Database
and returns you to the Credentials
Save
Saves the changes you have made.
The same credentials can be used by
more than one endpoint - you do not
need to have a separate entry in the
database for each endpoint.
Firewall Bandwidth
Maintenance
Traversal Control
Edit
page without
page.
Appendices