Adding Zones; Configuring Zones - TANDBERG VCS Administration Manual

Managing Zones, Neighbors and Alternates
In order to neighbor with another system
(e.g. VCS, gatekeeper or Border Controller) or
create an ENUM or DNS zone, you must add
a new zone on the local VCS. When adding a
new zone you will be asked to specify its Type;
this will determine which configuration options
will then be available.
To create a new zone:
•
VCS Configuration > Zones.
You will be taken to the Zones page.
Click New.
You will be taken to the Create Zone
•
xCommand ZoneAdd
Name
Enter the name you wish to give to this zone.
The name acts as a unique identifier, allowing
you to distinguish between zones of the same
type.
Type
From the Type drop-down menu, select the
type of zone you wish to add.
Once the zone has been created, the Type
cannot be changed.
Create Zone
Click here to create the zone. You will be
taken directly to the Edit Zone page.
Cancel
Click here to return to the Zones page without
creating the zone.
Getting System
Introduction
Started Overview
D 14049.01 D 14049.01
07.2007 07.2007

Adding Zones

page.
System H.323 & SIP
Configuration Configuration
Registration Zones and Zones and Call
Control Neighbors Neighbors Processing
5 5
TANDBERG VIDEO COMMUNICATION SERVER
ADMINISTRATOR GUIDE

Configuring Zones

Once you have created a new zone on the
local VCS you must configure it appropriately.
For traversal server zones, traversal client
zones and neighbor zones this will include
providing information about the neighbor
system such as IP address and ports.
Zones are configured via the
You will be taken to this page automatically
upon creation of a new zone. To access this
page for an existing zone:
•
VCS Configuration > Zones.
You will be taken to the
Click on the name of the zone you wish to
configure.
You will be taken to the
•
xConfiguration Zones Zone
[1..200]
The sections that follow describe the
configuration options available for each zone
type.
Firewall Bandwidth
Maintenance
Traversal Control
Edit Zone page.
Zones page.
Edit Zone page.
Appendices