TANDBERG VCS Administration Manual page 140

Command Reference - xConfiguration Text goes here
Traversal Server
cont... cont..
.
Zones LocalZone
Getting System
Introduction
Started Overview
D 14049.01
07.2007
STUN Relay
cont...
DefaultSubZone Bandwidth
System H.323 & SIP Registration
Configuration Configuration
Mode: <On/Off>
Determines whether the VCS will offer STUN relay services to traversal clients.
On : STUN relay services are available.
Off
: STUN relay services are not available.
Port: <04..65534>
Specifies the listening port for STUN relay requests.
Media Port
PerCall Inter
Intra
Zones and Call
Control Neighbors Processing
40
TANDBERG TANDBERG TANDBERG VIDEO COMMUNICATION SERVER VIDEO COMMUNICATION SERVER VIDEO COMMUNICATION SERVER
ADMINISTRATOR GUIDE ADMINISTRATOR GUIDE ADMINISTRATOR GUIDE
Start: <04..65534>
Specifies the lower port in the range to be used for
STUN media relay.
End: <04..65534>
Specifies the upper port in the range to be used for
STUN media relay.
Mode: <None/Limited/Unlimited>
Determines whether there is a limit on the bandwidth
for any one call to or from an endpoint in the Default
Subzone.
None : no bandwidth will be available.
Limited : there will be a limit on the bandwidth.
Unlimited
: there will be no limit on the bandwidth.
Limit: <..00000000>
(applies only if Mode is set to Limited)
Specifies the bandwidth limit (in kbps) for any one
call to or from an endpoint in the Default Subzone.
Mode: <None/Limited/Unlimited>
Determines whether there is a limit on the bandwidth
for any one call between two endpoints within the
Default Subzone.
None : no bandwidth will be available.
Limited
: there will be a limit on the bandwidth.
Unlimited
: there will be no limit on the bandwidth.
Limit: <..00000000>
(applies only if Mode is set to Limited)
Specifies the bandwidth limit (in kbps) for any one call
between two endpoints within the Default Subzone.
Firewall Bandwidth
Maintenance
Traversal Control
Appendices Appendices Appendices