Configuring Traversal Server Ports - TANDBERG VCS Administration Manual

Firewall Traversal

Configuring Traversal Server Ports

The VCS has specific listening ports assigned
for connections with the firewall. In most
cases the default ports should be used.
However, you have the option to change these
ports if necessary.
To configure the VCS traversal server ports:
•
VCS Configuration > Border Controller >
Ports
You will be taken to the Ports page.
•
xConfiguration Traversal Server
Media
•
xConfiguration Traversal Server
H.323
Getting System
Introduction
Started Overview
D 14049.01
07.2007
Configuring the VCS as a Traversal Server
System H.323 & SIP Registration
Configuration Configuration Control
Zones and Call
Neighbors Processing
06 06
TANDBERG VIDEO COMMUNICATION SERVER
ADMINISTRATOR GUIDE
Media demultiplexing RTP port
Specifies the port on the VCS to be used for
demultiplexing RTP media.
Media demultiplexing RTCP port
Specifies the port on the VCS to be used for
demultiplexing RTCP media.
H.323 Assent call signaling port
Specifies the port on the VCS to be used for
Assent signaling.
H.323 H.460.18 call signaling port
Specifies the port on the VCS to be used for
H.460.18 signaling.
Save
Click here to save your settings.
Firewall Firewall Bandwidth
Maintenance
Traversal Traversal Control
Appendices