Introduction
About the TANDBERG Video Communication Server
The TANDBERG Video Communication Server (VCS) is a key component of your video communications network. It allows you to
manage endpoint registrations and calls, and control the bandwidth being used within your network. The VCS also offers advanced
call policy that allows you to accept, reject and re-route calls, and can optionally include TANDBERG's FindMe™, which allows users to
have a single alias on which they can be contacted regardless of location,
The VCS forms part of TANDBERG's Expressway™ firewall traversal solution, allowing you to securely connect to other video networks
and equipment from your secured private network.
The VCS also acts as a gateway between SIP and H.323 protocols, and between IPv4 and IPv6, allowing you to make the most use of
your existing video communications investment.
Standard Features
•
H.323 gatekeeper
•
SIP Proxy/Registrar
•
SIP and H.323 support, including SIP/H.323 gatewaying for
locally registered endpoints
•
IPv4 and IPv6 support, including IPv4/IPv6 gatewaying
•
Bandwidth management on both a per-call and a total usage
basis, configurable separately for calls within the local
subzones and to neighboring systems and zones
•
Automatic downspeeding option for calls that exceed the
available bandwidth
•
URI and ENUM dialing via DNS, enabling global connectivity
•
Up to 2500 registrations
•
Up to 500 non-traversal calls
•
Up to 100 traversal calls
•
Up to 200 neighboring zones
•
Flexible zone configuration with prefix, suffix and regex
support
•
Can function as a stand-alone VCS or be neighbored with
other systems such as VCSs, Border Controllers, gatekeepers
and SIP proxies
Getting
System
Introduction
Introduction
Started
Overview
D 14049.01
D 14049.01
07.2007
07.2007
Main Product Features
•
Supports up to 5 Alternate VCSs for redundancy purposes
•
Optional endpoint authentication
•
Control over which endpoints are allowed to register
•
Administrator Policy including support for CPL
•
Embedded setup wizard via a serial port for initial
configuration
•
System administration via a web interface or RS-232, Telnet,
SSH, and HTTPS
•
Can be managed with TANDBERG Management Suite 11.8 or
newer
Optional Features
•
Firewall traversal server functionality, allowing secure
traversal of any firewall or NAT
•
Registration of traversal-enabled endpoints
•
STUN Discovery and STUN Relay services
•
User Policy (TANDBERG FindMe™)
•
SIP/H.323 gatewaying for non-registered endpoints
System
H.323 & SIP
Registration
Configuration
Configuration
Control
This Administrator Guide is provided to help you make the best
use of your TANDBERG VCS.
Your approach to this documentation depends on what you
want to do and how much you already know.
The Administrator Guide has been divided into several
sections, each providing different information. In some places
information is duplicated between sections to let you have all
the relevant information in one place.
This document does not have an index - this is intentional. If
the Table of Contents does not direct you to the information you
need, you can use the Find function in Adobe Reader to search
the text for keywords.
Note that the Administrator Guide describes a fully equipped
version. Your version may not have all the described extensions
installed.
Our main objective with this Guide is to address your goals and
needs. Please let us know how well we succeeded!
followed by the
most cases the page will be shown adjacent, with callouts
describing each of the configurable options.
•
The command is hyperlinked to the Command Reference table
at the back of this Guide; clicking on the hyperlink will take you
to the appropriate section of the table showing all the available
sub-commands and parameters.
Typing the command into the CLI without any parameters will
return a full list of parameters available for that command.
Typing a
purpose of that command or group of commands.
Zones and
Call
Neighbors
Processing
TANDBERG
VIDEO COMMUNICATION SERVER
ADMINISTRATOR GUIDE
About this Administrator Guide
In this Administrator Guide, instructions for performing a
task via the web interface are shown in the format:
•
Menu option1 > Menu option2
Name
of the page that you will be taken to. In
In this Administrator Guide, instructions for performing a
task using the command line interface are shown in the
format:
xConfiguration CommandName
?
after the command will return information about the
Firewall
Bandwidth
Maintenance
Traversal
Control
Appendices