Table of Contents
Advertisement
Basic H.323 Services Setup
About Basic H.323 Services
A quick basic setup of your TANDBERG Content
Server includes:
1.
Setting up H.323 services via the Content
Server interface.
2.
Making a test call recording.
3.
Changing the administrator password and
setting up server date and time on the
Windows Server.
Make sure that the E.164 aliases and H.323
IDs unique on your network are valid for
your gatekeeper or border controller.
By default, the Content Server's H.323
ID is set to the machine name, eg.
TANDBERG-<random number>. The H.323 ID of
a live Recording Alias is set to
Live<machine_
name> and the H.323 ID of an on demand
Recording Alias is set to
OnDemand<machine_
name>. If upgrading from S2, the machine
name will be replaced by the serial number.
You can register the Content Server with
either gatekeeper or border controller.
For simplicity in this document we'll use
gatekeeper to refer to either device.
The default local administrator account
!
should be used for administrative
functions such as system upgrades
and updates and when using Remote Desktop
access to the Content Server. It is therefore very
important to change your password as described
in the
Windows Server Setup
section.
For more on setting the administrative
properties and user configuration, see
the
Administrator Settings
section.
Table of
Introduction
Installation
Contents
D13898.06
MAY 2008
Start a Web browser and enter the IP
address of the Content Server. You
can use either http or https, with https
recommended for administrative access.
Go to the
Administrator Settings
>
Site
Settings
to set the
System Name
for the
Content Server.
Note:
The System Name is used by TMS
to identify the Content Server.
TCS
Backing up and
Quick Setup
Administration
Restoring
Step 1 - Initial Setup
When prompted for login, enter the
username administrator and
password TANDBERG
If required, set
Gatekeeper registration
to
Enabled
and set the
Gatekeeper IP
address. You can choose to register
the Content Server as a Terminal
or a Gateway. If you select
Gateway
registration, you will need to enter H.323
and E.164 Gateway prefixes.
Administrator
Conference
Settings
Setup
Conferences
18
TANDBERG
ADMINISTRATOR GUIDE
Go to
Conference Setup
Alias
Options. Edit the E.164 aliases
and H323 IDs for the default Recording
Aliases and save.
Save the
Site
Settings. You may refresh
the browser page to check if gatekeeper
registration has been successful.
View
Appendices
CONTENT SERVER
>
Recording
Advertisement
Table of Contents
