Event Data Fields - TANDBERG VCS Administration Manual

Logging Logging
Field Description
Protocol
Specifies which protocol was used for the communication.
Valid values are:
•
TCP
•
UDP
•
TLS
Reason
Textual string containing any reason information associated with an event.
Service
Specifies which protocol was used for the communication.
A service entry is one of:
•
H.323
•
SIP
•
H.225
•
H.245
•
NTP
•
DNS
•
LDAP
•
Q.931
•
Neighbor Gatekeeper
Message Type
Specifies the type of the message.
ResponseCode
SIP response code.
Src-ip
Specifies the source IP address (the IP address of the device attempting to establish communications).
The source IP is recorded in the dotted decimal format: (number).(number).(number).(number) or the IPv6 colon separated format.
Dst-ip
Specifies the destination IP address (the IP address of the destination for a communication attempt).
The destination IP is recorded in the same format as Src-ip.
Dst-port
Specifies the destination port: the IP port of the destination for a communication attempt.
Src-port
Specifies the source port: the IP port of the device attempting to establish communications.
Src-Alias
If present, the first H.323 Alias associated with the originator of the message
If present, the first E.164 Alias associated with the originator of the message
Dst-Alias
If present, the first H.323 Alias associated with the recipient of the message
If present, the first E.164 Alias associated with the recipient of the message
Auth
Whether call attempt has been authenticated successfully.
Method
SIP method (INVITE, BYE, UPDATE, REGISTER, SUBSCRIBE, etc)
Contact
Contact: header from REGISTER
AOR
Address of record
Getting System
Introduction
Started Overview
D 14049.01
07.2007

Event Data Fields

System System H.323 & SIP Registration
Configuration Configuration Configuration Control
Zones and Call
Neighbors Processing
3
TANDBERG TANDBERG VIDEO COMMUNICATION SERVER VIDEO COMMUNICATION SERVER
Firewall Bandwidth
Maintenance
Traversal Control
ADMINISTRATOR GUIDE ADMINISTRATOR GUIDE
Appendices