Creating A Subzone - TANDBERG VCS Administration Manual

Bandwidth Control Bandwidth Control
To add a new subzone:
•
VCS Configuration > Local Zone > Subzones.
You will be taken to the Subzones page.
New
Select .
You will be taken to the Create Subzone
•
xCommand SubZoneAdd
Name
Enter the name you wish to assign to the subzone. You will
refer to this name when creating Links.
Subnet
Enter the IP address of the subnet. In conjunction with the
Prefix, this will define the range of IP addresses that will belong
to this subzone.
Prefix
Enter the number of bits of the Subnet IP Address
match for an IP address to belong in this subzone.
For example:
255.255.0.0 is equivalent to a prefix length of 16
255.255.255.0 is equivalent to a prefix length of 24
Bandwidth
See Applying Bandwidth Limitations to Subzones
description of these fields.
Create Subzone
Click here to create the subzone and return to the subzones
page.
Getting System
Introduction
Started Overview
D 14049.01
07.2007
page.
which must
for a
System H.323 & SIP
Configuration Configuration

Creating a Subzone

Registration Zones and Call
Control Neighbors Processing

TANDBERG TANDBERG VIDEO COMMUNICATION SERVER VIDEO COMMUNICATION SERVER
ADMINISTRATOR GUIDE ADMINISTRATOR GUIDE
Firewall Bandwidth Bandwidth
Maintenance
Traversal Control Control
Appendices